Use your chip mounter to insert the radial components .
S-RF1001 The through-hole feeder for mounter
*The S-RF1001 is a revolutionary new concept from Southern Machinery that allow the placement or insertion of both surface mount and through-hole components. Can adaptive most of mounter.
1) Feeder Dimension (LWH): 550110130mm
2) Drive Mode: Air-driven
3) Power Voltage: DC 24V/1A
4) Air Pressure & Consumption: 0.4-0.6
5) Tape Component Lead Spa : 1.5~10.0mm
6). Distance Transport Hole: 12.7mm/15mm
7). Distance Transport hole to cutting edge: 11mm
8). Tape Component Height: Max. 35m
9). Component Body Diameter: Max. 18
10). Speed: 0.5 Sec./pcs
11). Feeder Weight: Approx. 10KG
The dimensions for tape packaging and components which are important for the*Tape and component dimensions
radial feeder are shown in the graphic. Please consider, that the dimensions
shown in the drawing are mainly minimum or maximum sizes.
Numerous special designs are possible and available for components with
varying dimensions with regard to size, leads and tape packaging.
*Radial Lead Taped Component Packaging Guidelines
Applicable to reel, cassette and ammo-pack (fold-pack) containers for radial lead taped components. A tape trailer having at least 3 feed holes is required at the end of the tape to feed the last component into the feeder.
*Taped Component Removal Pull Testing
The taped components shall unwind (reel and cassette) or unfold (ammo-pack) with a force not to exceed 5 Newtons (17.9 oz.). Pull test shall be applied as illustrated in Figure 43.
*Input Tape Splicing
Component can be spliced with an acceptable splicing tape. Universal splicing tape is recommended. Splices must not interfere with tape feed holes and overall tape thickness, including tape, leads, and tape splices, shall not exceed 1.5 mm (0.059 in.).
*Other more involved machine link:
Realize radial components inserting by mounter with s rf1001 the through-hole feeder for mounter from Liang Chan