SC-900 Multi-Cutter PCB Separator For cutting: 0.2mm-5mm thickness of the panelized PCB aluminum, copper, FR4, glass

SC-900 Multi-Cutter PCB Separator

For cutting: 0.2mm-5mm thickness of the panelized PCB aluminum, copper, FR4, glass, etc., special plate

SC-900 Separator machine features:

1, the use of multiple sets of upper and lower knife while cutting

2, the bottom of the device with adjustable foot castors, easy to move equipment, non-moving need to be stable and fixed; feet Cup adjustable height 50MM or more;

3, equipped with SMEMA interface communication with other devices can be linked, with reserved network interface, the follow-up factory aspects of networking;

4, the device uses power: AC230V gas source: 4-6KGF / cm2

5, the necessary safety devices;

6, the equipment needs to operate smoothly, the necessary test components;

7, according to the normal production capacity needs to reach 1500PCS / H or more

8, there are data monitoring statistics output: boot time monitoring, capacity monitoring, equipment failure information and automatic rejection system

9, using multiple groups simultaneously cut down on the knife

10, the distance between the knife can be accurately adjusted, sub-board thickness to be met: 0.6MM-3.5MM up and down the distance between the knife can be accurately adjusted, sub-board thickness to be met: 0.6MM-3.5MM

11, the knife and the knife gap can be adjusted according to the PCB board V-CUT spacing, precision control in the 0.1MM

12, the distance between two adjacent blades can be adjusted between 8MM-25MM, can quickly adjust the required width;

13, circuit board material: aluminum, copper, FR4, glass fiber board;

14, Conveyor line speed can be adjusted;

15, the product pick and place institutions can be adjusted according to the width of the product;

Specifications：