1-SPLICING 8MM PAPER，PRE SPLICING (for all carrier paper tape sizes):
Determine which pins to use to avoid cutting into a pocket.
Turn ratchet to select correct pitch.
Peel back the mylar up to the first full pocket. Cut the carrier
tape on a new reel, making sure not to leave empty pockets and not to
cut through the mylar. Cut the mylar leaving a small tab. (Apr. ¼”)
Cut the carrier tape in the feeder, making sure not to leave
empty pockets. Peel backing on splice tape. Line up the dimples on
the splice tape with the holes in the carrier tape in the feeder.
Line up the dimples on the new reel, making sure to mate up
the ends and line up the mylar tab. Fold over tape and press with
fingers. Remove clear plastic.
SMT Splicing Embossed Feeder Tape – Brass Stitch and Tape Splice from Shenzhen Southern Machinery Sales And Service Co., Ltd