Manufacturers selling SMT FUJI placement machine feeders,nozzle, machine type:such as: CP6,CP7,XP142 XP143 QP341,QP242,nozzle main specifications :/0.4/0.7/1.0/1.3/1.8/ 2.5/. Quality assurance (special specifications can be customize).
Feeder selection methods:
The commonly used types of feeder there are the following specifications:
1, Width of 8mm,12mm,16mm,24mm,32mm for pitch of 0802,0804,1204,1208,1608,1612,
2, General material points: 0402,0603,0805,1206,2512
3, According to the width of the material reel to select the correct size
4, When finished the width of the material reel then check to see if the feeder pitch fit with it
5, Check the FEEDER gear for mixed waste components
6, Check whether FEEDER less accessories, such as spring, pitch gear is lose, the main bar is variant
Feeder installation steps:
1, Put the components installed on the selected FEEDER
2, Confirm component installation position according to material list
3, With a polishing cloth or brush clean the FEEDER table
4, When installation is to use pressure steady FEEDER clasp with hand, smoothly into the position and button clasp
