PCB loader/unloader
The latest introduction of PCB loader/unloader 2017
Characteristics of the equipment.
1.Special aluminum alloy mechanism to better understand the operation status of magazines.
- Stable casting platform structure design, improve the stability of equipment 0.3. Panasonic PLC control, multi-function circuit and program design, performance stability, ensure the smooth and smooth production line.
-
Humanized programming, 4 kinds of PITCH selection, can set the step distance of receiving/transmitting PCB.
-
Standard SMEMA communication interface, which can communicate with other automation equipment.
-
The material box shall be transported by the engineering plate.
-
Adjustable push plate speed control.
-
Three-point positioning type upper and lower pneumatic clamping, ensure the location of the material box is accurate.
-
Push plate protection system to ensure that PCB board is not crushed, reducing process loss. This equipment adopts SMT circuit board production line operation
PCB size: (mm): 50 x50~330 x445
Working height (mm): 900 + 20 (STD)
groove Change time: bout 6 seconds
The machine size :1650(L)845(W)1250(H)
Step selection: 10.20.30.40 mm
Power supply: AC 110/220v plus or minus 10V, 50/60hz knife bank
Dimensions (L * W * H, MM) : 355 (L) * 320 (W) * 565 (H)
Air pressure and gas flow : 4-6bar / 10 litres/min
Weight (KG):140 kg

This equipment is used SMT circuit board production line operating upper and lower plates
PCB SIZE:(mm):50×50~330×250
Working height (mm):900±20(std)
Tank replacement time: about 6 seconds
Machine dimensions:1920(L)845(W)1250(H)
Step Select: 10.20.30.40 mm
Power Supply: AC 110/220V±10V, 50/60HZ
Magazine size (LWH,MM):355(L)320(W)565(H)
Barometric pressure and gas flow rate: 4-6bar/up to 10 l / min
Weight (KG):260KG



If you want to get more product introductions, please contact us:
www.smthelp.com
ming@smthelp.com
jasonwu@smthelp.com