ESD adhesive tape improves process quality for a EMS SMT factory

ESD adhesive tape used in a SMT factory-yis@smthelp.com

Used antistatic polyimide film as base material, single sided coated with high performance silicone pressure sensitive adhesive, resistance on the back of tape is less than ten to the 5^th power, coating glue surface is less than ten to 9^th power, the peeling static voltages is less than 50V, to make sure electronic parts did not damage from peeling static voltages.

Protect component from high temperature when PCB is in reflow oven and Tin furnace.

No residuals when the tape is torn off the PCB.

Protect PCB from Scratch and Dust.

Features:

High insulation, high temperature resistance, low electrolysis, no glue rest, ESD.

Usages:

Extensive ESD used as H degree electrical machine, electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry.

Specification:

Brand/model Southern Machinery:T33006

Width 60mm

Length 33m

Thickness Approx.0.06mm

Elongation >=50%

Working temperature -70℃~280C℃

Adhesion(N/25mm) 8N/25mm

Tensile Strength(N/25mm) 150N/25mm

Voltage Withstand (KV) 5KV

Insulation Resistance (Mohm) 10^6~10^9Ω