Tag Archives: AI

Use of PCB Pallets in Wave Soldering

Use of PCB Pallets in  Wave Soldering
Patch components are used more and more on the circuit board, but there are still some perforated components between them. For this kind of board, selective soldering is the best solution, but not every company has enough funds to purchase selective soldering equipment, or the number of this type of circuit board is too small, specifically to buy selective soldering equipment is not Cost-effective. Manual welding is prohibited in certain industries such as the automotive industry

Wave soldering pallet 8

Therefore, in PCB wave soldering, using trays to block those patch components is a good method: reliable, fast production, and adaptability to high-capacity requirements.

www.smthelp.com

Wave soldering pallet 2

The benefits of using trays:
Lead-free soldering requires higher soldering temperatures. Therefore, the circuit board is more easily bent during welding. The tray provides maximum protection of the circuit board during soldering and prevents bending.

Similarly, in the automotive and consumer electronics industries, many special-shaped circuit boards have emerged for the needs of applications. It is sometimes difficult to transport these shaped plates with conventional chain rails and mesh belts, and placing the circuit board plates in trays allows any type of circuit board to be shipped.

Wave soldering pallet 1

By soldering some of the bottom components through the tray, it is also possible to use PCB wave soldering equipment for selective soldering of the product.

Since most trays are thick (sometimes 15 mm), solder certainly does not flow to the top of the board. The oxide layer on the solder surface will also be washed away by the edge of the tray before the board reaches the peak, so that when the solder starts, the tin is relatively clean.Wave soldering pallet 6

By adding some stiffening strips to the tray, it can increase its hardness to withstand high-strength welding. It is also possible to install heat-absorbing blocks, component fixing devices and some other auxiliary devices on the upper part.

The use of pallets also helps standardize the width of the product line, soldering different circuit boards on the same production line, and can use bar code readers and other identification tools to quickly change process programs for different boards.

Although there are many advantages to using trays in lead-free soldering, it can also cause solder balls.

Requirements for pallet materials:
In order to maximize the service life of the trays, the trays must be made of materials that can withstand high temperatures and harsh process conditions, especially for lead-free soldering.

www.smthelp.com

Wave soldering  tray 1

To meet these requirements, the material used to make the tray must meet the following characteristics:
• High dimensional stability
• Good thermal shock resistance
• Can remain flat after repeated use
• Corrosion resistance (flux and cleaning agent)
• Does not absorb moisture

The use of the tray brings the process problems:
The flux system must be able to spray the circuit board completely with flux. Poor tray designs can lead to “shadow effects” in flux spraying: Some parts of the board have insufficient flux or no flux at all. The flux must be sprayed onto the board and spread through the capillary action.

Before the tray touches the crest, it must be heated in the preheating unit. A typical preheating configuration is a combination of heat pipes and hot air forced convection. If the temperature drops before contact with the peak, the tray will have an endothermic effect, making the welding process difficult to control.

The use of trays requires a wave height of up to 0.5 inches (12.5 mm). In the case of such a high pump speed, the use of nitrogen can help reduce dross. When using pallets in lead-free soldering, Vitronics Soltec’s perturbed “smart wave” can also promote tinning of the perforated component.

In addition, we must pay special attention to keeping the circuit board in the pallet flat. If there is a gap between the circuit board and the tray, the flux will flow into the gap, and the solder will flow to the board when passing through the peak. This will cause solder residue on the board.

Wave soldering  tray 3

The gap between the circuit board and the tray may cause solder residue on the circuit board

Circuit board and tray design recommendations:
Avoid placing larger components near the piercing element as this can cause shadowing effects and tin difficulties.

Leave proper clearance around the pins and edges of the through-hole components so that solder can flow. These tin guides will guide the solder to the seat of the tray opening, while also greatly improving the solder flowability.

www.smthelp.com

Wave soldering  tray 4

The tin slot at the tail of the tray allows the solder to flow smoothly back to the tin tank

The opening of the tray should be as large as possible to facilitate the flow of solder. This will reduce some of the welding defects, such as: short circuit and solder balls. At the same time, it is also beneficial to the solder filling of the through hole, because the large opening also means that there is more energy to enter the welding area.

Prepared by :ming@smthelp.com

SC-2500S PCB Router Separator

SC-2500S PCB Router Separator

SC-2500S PCB Router Separator

 

Features:

1, using the next vacuum mode, in line with the theory of free fall, good dust collection effect.

2, special jig fixed more solid, to avoid the poor positioning caused by the cutting accuracy error.

3, the system automatically fixes according to the product installation location, to ensure high-precision product cutting requirements.

4, the static eliminator is installed in addition to electricity, dust blower continued to work to eliminate static electricity generated when cutting high-speed spindle to avoid damage caused by static electricity parts to avoid accumulation of dust due to static electricity.

5, the use of safety doors, reduce noise and dust, improve safety.

Vacuum cleaner with vacuum collection box (according to production capacity or cutting dust collection time scheduled maintenance)


 

PCB Separator also called PWB Depaneling machine. Rotate router bit to cut high-density component PCB panel to single products v-groove or perforated line. Utilize all of our accumulated technology to help minimize dust attach on PCB. Router machine has following features.

 

 

 


SC-2500S PCB Router Separator specifications:

Function Items

功能项

参数/Hardware Demand

Model

型号

ASC-2500S
Dimension

机台结构

L650*W650*H1765mm
Power

电源

220V/50HZ
Machine Wattage

机台功率

3.6KW
Weight

重量

About 300KG
Cleaner Dimension

吸尘器尺寸

内置式(Inside)/L500*W490*H590mm
Cleaner Wattage

吸尘器功率

2.2KW/220V
Table Dimension

工作台尺寸

260mm*260mm
Cutting Speed

X、Y轴切割速度

0-100mm/s
X,Y,Z axis Driving Speed X、Y、Z轴驱动速度 X、Y轴0-1000mm/s(min),Z轴0-750mm/s(min),伺服马达方式驱动X, Y axis 0-1000mm/s (min), Z axis 0-750mm/s (min), servo motor drive
Repeatability Accuracy 机台重复精度 ±0.01mm
Working Area 工作区域(可加工行程) X:0-260mm,Y:0-260mm,Z:0-80mm
PCB Thickness 切割PCB厚度范围 0.5-5mm
Router Bit Diameter 铣刀直径 0.8-3.0mm
Cutting Precision 切割精度 ±0.01mm
Cutting Ability 切割能力 具有切割直线、圆弧、圆、L型和U型的能力

Linear, Circular, U-curve, Arc, L-curveCutter Change刀具更换系统可手动换刀系统,需工具(随机配送)

Manual, tools needed Cutter Attrition System刀具磨损系统可智能设定铣刀下刀段数(0-5段)

The number of milling cutters (0-5 section)Break Detection断刀检测无(none)Cutter Life Control刀具寿命控制程序控制(controlled by Program)Table NumberTable数量1个Spindle Speed主轴转速60000rpmSpindle Cooling System主轴冷却系统气冷方式Air cooling modeCleaner Mode集尘方式下集尘(collect dust downside)Working Power工作电源220V ,50HZAir press空压供给0.4MpaSafety Device安全装置采用安全防护门加门锁感应器Safety door and door lock sensorMode机型模式离线机型,手工装载卸载PCBA(offline, load and unload PCBA by hand)Auto failure test and repair mode故障自动检知维修模式系统具有自我诊断功能,实时错误信息显示,能直观地查询设备各个IO端口状态,易于排除故障。

Self-diagnosisdisplay failure information in real time, query IO state visually, easy for troubleshootingComputer & Operation system电脑和操作系统工控机、Windows 7

IPC, Windows 7Program Backup程式备份USBSoftware access control软件权限管理密码保护,依权限进入对应操作界面,保护系统重要参数。(Password protectionthe operator enter corresponding interface according to authority to protect important parameters.)Programming编程可视化界面,单个程序切割点容量无限制,切割路径动态模拟。(Visual interface, the cutting point capacity for a single program should be over 400, dynamic simulation of cutting schedule.)Auto correction of the mark pointMark点自动校准功能具备Mark点自动校准功能(Yes)Fixture 治具万用治具可供选择(universal fixture)Voice control噪音控制运行时,噪声小于60分贝(离设备一米距离测量)

≦78 dBmeasured in 1M’s distance Maintenance Period保修周期整机1年或以上,主轴2年或主轴3000小时保养服务。

1 years or more, spindle for 2 years or spindle maintenance service for 3000 hours.Technology Support技术支持及培训提供设备操作、编程,硬件保养,维修培训服务;程序永久免费升级。(Offer service of operation, programming, hardware caring and maintenance training; free upgrade of application. )

 

主轴Main axis S4225-B60 S4225-B60
CCD IMAGING
丝杆Ball Screw Hiwin进口精密研磨滚珠丝杠Hiwin precise grinding ball screw imported
导轨Lead Rail Hiwin进口直线加宽导轨Hiwin straight widened lead rail imported
伺服电机Servo Motor 松下Panasonic
静电消除器Static Eliminator ADK-801ADK-801
工控主机IPC Host 研华ADHNTECH
运动控制卡Motion control card 固高ADTECH
显示器Monitor 华硕ASUSASUS
控制系统Control System Windows7
操作界面Operation Inteface Windows7
编程Program 在线方式Online
视觉系统Visual System ASC视觉分板机系统像素计算型高精度CCD视觉定位校正系统CCD Visual alignment system
设备尺寸Machine size L1380*W1250*H1875mmL1380*W1250*H1875mm
重量Weight 约300KG
底脚可调高度Foot Height adjustable 50~70mm
板最大厚度Max.PCB Thickness 5mm
整机功率(含集尘器)Power (included dust collector) 4000w
最大转速Max Rotation Speed 60000rpm/min
冷却方式Cool Down 气冷+夹具散热cold air and clamp radiating
更换工具方式Tool replacement 专用扳手更换by specialized tool
最大切割Shear speed 0~100mm/s
最大移动速度Max Moving Speed 1000mm/s
切割重复精度Shear Repeat Accuracy ±0.02mm
集尘器功率Dust Collector Power 2.2kw 220v三相电机2.2kw 220v three phase motor
气压Pressure 0.4Mpa以上0.4Mpa above
编程方式Program mode 在线编程Online program
编辑功能Edit 直线、孔状、圆弧、圆Straight line, hole, arc, circuit
程序存储Procedure Storage 根据需要选择存储位置choose storage position according to needs
配置编程Camera IMAGING高像素彩色CCD IMAGING high pixel color CCD
刀具直径补偿Compensation on Blade DIA 多种补偿方式供用户选择many choices for option
三色灯Three Color Indicator LED三角灯监视机器的各种工作状态LED LED indicator monitoring working status of the machine
刀具好坏检测Blade Inspection 刀具寿命根据用户设定的下沉段数、产品数量及切割长度等方式选择According to PCB quantity and shear length
马达过热检测Motor overheat Inspection 有过载、过热、低电压等保护功能Protection on overload, overheat, low voltage,etc
伺服过载检测Servo overload Inspection 有过载、低电压、线路是否正常等保护功能Protection on overload, low voltage, circuit, etc
主轴寿命跟踪Main axis life Tracking 主轴寿命自动检测Automatic Inspection on Life of main axis
分板计数Shear Qty Counting 分板计数、计时Counter on shear quantity and Time recording
机器报错记录Error Record 软件自动记忆机器所有报警记录automatic memory on all error
轴位置精度Axis Position Accuracy 0.001mm
分板精度Accuracy of Shear ±0.01mm
工作范围保护罩Safety Shell of working range 采用四面门保护方式Using four door and window protection
门的互锁保护传感器Protection Inductor on Interlocking 安全门微动开关感应able to induct inches switch of safety door
紧急停止按钮Emergency Stop Button Yes
铣刀方式Milling 采用左旋铣刀,直径0.8-3.0MM范围可选Milling by left rotation, DIA of 0.8-3.0mm optional
加工方式Process 模拟运行和实际加工,Table可以交替加工不同PCBASimulation and actual operation, a single Table can be alternately processed different PCBA board

 

 

SC-3500S Automatic Inline PCB Separator

SC-3500S Automatic Inline PCB Separator

Features:

1, vacuum cleaner built-in vacuum mode, in line with the theory of free fall, dust collection effect is good.

2, the equipment adopts automatic loading and unloading products, can be directly on the wiring body or on the board machine.

3, using a special fixture with products (pcb), to avoid poor placement caused by cutting error.

4, the system automatically fixes the installation error, to ensure product precision cutting requirements.

5.It is equipped with static eliminator. When dividing, the dust remover will work continuously to eliminate the static electricity generated when the high-speed spindle cut. It can avoid the damage caused by the static electricity and avoid the accumulation of dust due to static electricity.

6, the use of safety doors, reduce noise and dust, improve safety.

7, there are follow-up vacuuming function, dust collector attached to the dust collection box (according to capacity cutting needs or dust collection time scheduled maintenance).

8, touch the display as a display, setting, control, can display more content, the operation directly through the touch screen operation, easy to operate.

9, can be directly docking the next equipment, sub-plate processing.

10, in the cutting process, if broken knife, equipment with automatic tool change function, without manual to change the knife.

11, Equipment using Mes system, the factory can control the machine everywhere, equipped with WIFI function can be controlled.


Specifications:



Function Items

功能项

Hardware Demand

Model

型号

ASC-3500S(加皮带)
Dimension

机台结构

(含皮带)L1750*W1100*H1850mm

(不含皮带)L1450W1100H1850mmPower

电源

220V/50HZMachine Wattage

机台功率

5.5KWWeight

重量

About1000KGCleaner Dimension

吸尘器尺寸

内置式(Inside)/L450W450H450mmCleaner Wattage

吸尘器功率

2.2KWTable Dimension

工作台尺寸

350mm*350mmCutting Speed

X、Y轴切割速度

0-100mm/sX,Y,Z axis Driving SpeedX、Y、Z轴驱动速度X、Y轴至少1000mm/s(min),Z轴至少750mm/s(min),伺服马达方式驱动(driven by servo motor)Repeatability Accuracy机台重复精度±0.02mmMechanical hand X, Z stroke机械手X、Z行程X:420mm、I:60mmManipulator X, Z running speed机械手X、Z运行速度200mm/sMechanical hand grasp mode机械手抓取方式真空吸附Precision of repeated positioning of manipulator机械手重复定位精度±0.04mmMechanical hand grab products (PCB) dimensions机械手抓取产品(PCB)尺寸350mm*350mmPCB feeding trackPCB上料轨道皮带输送;宽度60~360mm可调Split plate product分板产品下料皮带输送;宽度420mmWorking Area工作区域(可加工行程)X:300mm,Y:350mm,Z:0-50mmPCB Thickness切割PCB厚度范围0.5-2mm(or thicker),或范围更大 Router Bit Diameter铣刀直径0.8-2.0mmCutting Precision切割精度±0.01mmCutting Ability切割能力具有切割直线、圆弧、圆、L型和U型的能力

 

Linear, Circular, U-curve, Arc, L-curveCutter Change刀具更换系统自动换刀系统 Automatic tool changing systemCutter Attrition System刀具磨损系统可智能设定铣刀下刀段数(5段)

Smart to set the no. of knife section(0-3)Break Detection断刀检测有(have)Cutter Life Control刀具寿命控制程序控制(controlled by Program)Product testing产品检测有(have)Table NumberTable数量1个Table FunctionTable功能并行Table运行方式;设备能实现1个Table联动功能(1 tables run in parallel)Spindle Speed主轴转速60000rpmSpindle Cooling System主轴冷却系统风冷方式(air cooling)Cleaner Mode集尘方式下集尘(collect dust downside)Working Power工作电源220V ,50HZAir press空压供给0.5Mpa以上(above)Safety Device安全装置采用安全防护门或感应器(security door or sensor)Mode机型模式在线机型,全自动装载卸载PCBA(offline, load and unload PCBA by hand)Auto failure test and repair mode故障自动检知维修模式系统具有自我诊断功能,实时错误信息显示,能直观地查询设备各个IO端口状态,易于排除故障。

Self-diagnosisdisplay failure information in real time, query IO state visually, easy for troubleshootingComputer & Operation system电脑和操作系统工控机、Windows 7或以上版本。

PICWindows 7 or more advanced versionProgram Backup程式备份USBSoftware access control软件权限管理密码保护,依权限进入对应操作界面,保护系统重要参数。(Password protectionthe operator enter corresponding interface according to authority to protect important parameters.)Programming编程可视化界面,单个程序切割点容量无限制,切割路径动态模拟。(Visual interface, the cutting point capacity for a single program should be over 400, dynamic simulation of cutting schedule.)Auto correction of the mark pointMark点自动校准功能具备Mark点自动校准功能(Yes)Fixture 治具ASC-3500S专用治具ASC-3500S special fixtureVoice control噪音控制运行时,噪声小于60分贝(离设备一米距离测量)

≦78 dBmeasured in 1M’s distance Maintenance Period保修周期整机1年或以上,主轴建议2年以上并在保内提供主轴3000小时保养服务。

Over 1 year for the whole machine, and over 2 years for the spindle, and the spindle enjoys 3000 hours’ maintenance during the periodTechnology Support技术支持及培训提供设备操作、编程,硬件保养,维修培训服务;程序永久免费升级。(Offer service of operation, programming, hardware caring and maintenance training; free upgrade of application. )



SC-900 Multi-Cutter PCB Separator For cutting: 0.2mm-5mm thickness of the panelized PCB aluminum, copper, FR4, glass

 

SC-900 Multi-Cutter PCB Separator

For cutting: 0.2mm-5mm thickness of the panelized PCB aluminum, copper, FR4, glass, etc., special plate

SC-900 Separator machine features:

1, the use of multiple sets of upper and lower knife while cutting

2, the bottom of the device with adjustable foot castors, easy to move equipment, non-moving need to be stable and fixed; feet Cup adjustable height 50MM or more;

3, equipped with SMEMA interface communication with other devices can be linked, with reserved network interface, the follow-up factory aspects of networking;

4, the device uses power: AC230V gas source: 4-6KGF / cm2

5, the necessary safety devices;

6, the equipment needs to operate smoothly, the necessary test components;

7, according to the normal production capacity needs to reach 1500PCS / H or more

8, there are data monitoring statistics output: boot time monitoring, capacity monitoring, equipment failure information and automatic rejection system

9, using multiple groups simultaneously cut down on the knife

10, the distance between the knife can be accurately adjusted, sub-board thickness to be met: 0.6MM-3.5MM up and down the distance between the knife can be accurately adjusted, sub-board thickness to be met: 0.6MM-3.5MM

11, the knife and the knife gap can be adjusted according to the PCB board V-CUT spacing, precision control in the 0.1MM

12, the distance between two adjacent blades can be adjusted between 8MM-25MM, can quickly adjust the required width;

13, circuit board material: aluminum, copper, FR4, glass fiber board;

14, Conveyor line speed can be adjusted;

15, the product pick and place institutions can be adjusted according to the width of the product;

Specifications

ASC-900

Machine Size

L2160*570*1050mm

Maximum Length

Unlimited

Cutting Speed

80, 120, 200, 400mm/s

Cutting thickness

0.2-5mm

Voltage

230V/50Hz110V/60Hz)

Machine Weight

158KG

Power

120W

Cutting number

9 multi-join

Knife quantity

40 pcs

Spacer

40 pcs

Software Configuration

English Version


JUKI nozzle :Which is the most used?

JUKI nozzle

Use black material Seiko forming – wear long life

German technology to create high precision – beyond the original quality

  1. Applicable models: JUKI placement machine

KE2000 series KE2010 KE2020 KE2030 KE2040 KE2050 KE2060 KE2070 KE2080 KE-3010A KE3010ACL KE3020VA JX series JX-100 JX-200 JX-300LED JX-100LED JX-350 , FX series FX-1, FX-2, FX-3, FX-3R, FX-3RA.

  1. Using nano-aviation materials, through ultra-precision machining and grinding, the nozzle will not wear out and become white. It can be durable.

 

 

JUKI nozzle JUKI nozzle JUKI nozzle JUKI nozzle

JUKI nozzle

JUKI nozzle

 

JUKI nozzle

 

● our advantages:

Production advantages: the use of close CNC / milling machine, lathe, grinder, line cutting 35 world first-line brand processing equipment, to make Seiko quality. Non-standard nozzles and the workpiece can be quickly customized, 2-3 working days can be delivered, ultra-rush orders can be shipped the same day.

Long-term inventory, a large number of conventional suction nozzle stock, immediately after the order can be shipped, order to reach 1,000 US dollars can be shipped for free
Price advantage: Suction nozzle and SMT placement machines are a variety of peripheral equipment accessories are sold at preferential prices. Truly Seiko quality, the Chinese price, used to repay customers. We only do Seiko quality, low-end high-margin products do not do!
Team advantage: We have a group of 20 years of experience with automatic insertion machine, SMT machine service engineer team
Payment advantages: As long as you are a factory customer, we can do monthly payment

JUKI nozzle

Buy now for just $ 25, please click on the link for more details

 

We also sell all kinds of brand accessories, such as JUKI,universal, panasonic, yamaha, samsung, Fuji, Siemens, TDK

If you have any needs, please feel free to contact us:

info@smthelp.com

ming@smthelp.com

JUKI nozzle

FUJI XP142/143 2.5/3.7# Nozzle

 SAMSUNG nozzle  CP45FV/SM420 CN065 CN040 CN220 CN400 TN220 TN065

Panasonic nozzle Panasert- smt nozzle for pick and place machine

 

3D viewer let know more about SMT EMS PCB assembly

SMT pick and place machine for EMS PCB assembly

Transfer Arm Machine for SMT PCB assembly

SMT Placement Head Splindle for PCB assembly

AI Machine X-Y Frame Assy for EMS PCB assembly

Axial Lead Clinch Head for EMS PAB Assembly


Electronic Component Auto Feeder for PCB Assembly

Electronic Component Auto Feeder for PCB Asembly
by smthelp
on Sketchfab

Electronic Resistor Cut N Bend for PCB Assembly

3D Viewing SMT spare parts in THT PCB Machine

       

      We  Provide different spare parts and wearing parts of different brands and models.(UIC,TDK,Panasonic,Samsung,Fuji,Juki,SIMMENS……) Only need to tell us your parts‘ machine model and P/N. Fuji TDK Juki Samsung YAMAHA  UIC Panasonic

      www.smthelp.com

      Why Choice Us?

      • We owning 10 years experience in providing SMT/EMS services.
      • Familiar design and engineering capability both on Hardware and software.
      • Successful design experience in SMT line.
      • Lean manufacturing.
      • High mixed, high value, low volume business expertise service.
      • Flexible operation, fast response and total satisfaction.
      • Good after-sales and extra value creation services including logistics support, valet procurement, supplier audit service and in factory office offering.
      The Future of Stencil Cleaning _ SMThelp.com

      Listen! Let Obama tell you how to SMT to make your Electronics product

       

      WHY SMT?  HOW TO EMS?

      Surface Mount Assembly Classifications

      HOW TO MAINTAIN AUTO INSERTION AND SMT MACHINE — ESD CLEANING AND TESTING PROCEDURES

      HOW TO IMPROVE AUTO INSERTION MACHINE SPARE PARTS LIFETIME 

       

      ODM, OEM, PCB Manufacturing and PCB Assembly Services ONE-STOP PCB Assembly Solutions for EMS

      PCB Loader/Unloader The latest introduction to 2017

      PCB  loader/unloader

      The latest introduction of PCB loader/unloader 2017

      Characteristics of the equipment.

      PCB Automatic UNloader PCB conveyor

      1.Special aluminum alloy mechanism to better understand the operation status of magazines.

      1. Stable casting platform structure design, improve the stability of equipment 0.3. Panasonic PLC control, multi-function circuit and program design, performance stability, ensure the smooth and smooth production line.
      2. Humanized programming, 4 kinds of PITCH selection, can set the step distance of receiving/transmitting PCB.

      3. Standard SMEMA communication interface, which can communicate with other automation equipment.

      4. The material box shall be transported by the engineering plate.

      5. Adjustable push plate speed control.

      6. Three-point positioning type upper and lower pneumatic clamping, ensure the location of the material box is accurate.

      7. Push plate protection system to ensure that PCB board is not crushed, reducing process loss. This equipment adopts SMT circuit board production line operation

      PCB size: (mm):   50 x50~330 x445
      Working height (mm): 900 + 20 (STD)
      groove Change time:   bout 6 seconds
      The machine size :1650(L)845(W)1250(H)
      Step selection:  10.20.30.40 mm
      Power supply:  AC 110/220v plus or minus 10V, 50/60hz knife bank
      Dimensions (L * W * H, MM) : 355 (L) * 320 (W) * 565 (H)
      Air pressure and gas flow : 4-6bar / 10 litres/min
      Weight (KG):140 kg

      自动装载机 PCB loader
      loader

       

      This equipment is used SMT circuit board production line operating upper and lower plates

      PCB SIZE:(mm):50×50~330×250
      Working height (mm):900±20(std)
      Tank replacement time: about 6 seconds
      Machine dimensions:1920(L)845(W)1250(H)

      Step Select: 10.20.30.40 mm
      Power Supply: AC 110/220V±10V, 50/60HZ
      Magazine size (LWH,MM):355(L)320(W)565(H)
      Barometric pressure and gas flow rate: 4-6bar/up to 10 l / min
      Weight (KG):260KG

      PCB Automatic UNloader
      PCB Automatic UNloader

      PCB

      SMT loader

      SMT loader
      This equipment is used SMT circuit board production line operating upper and lower plates
      AI smt线
      AI smt line           

      If you want to get more product introductions, please contact us:
      www.smthelp.com
      ming@smthelp.com
      jasonwu@smthelp.com

       

      PCB assembly

      Surface Mount Assembly Classifications for EMS

      Surface Mount Assembly Classifications

      Three general classes for the intended end use of electronic assemblies have been established. As applications and functionality increase there may be overlap of equipment between classes. The owner of the application has the responsibility to determine the class that applies. Although a single class may be referenced, specific requirements defined in other classes may apply as well. If a class is not stated for a criterion then the single criterion applies to all classes.

      Class 1: Consumer Products: This class of product includes non-critical applications which shall be reliable and cost effective but for which extended life is not the primary objective. Examples include products manufactured for general consumer applications.

      Class 2 – General Industrial. This class includes high performance commercial and industrial products in which extended life if required but for which uninterrupted service is not critical. Application and environmental considerations should be taken into account.

      Class 3 – High Reliability. Equipment in this class includes those equipment which continued performance is critical, equipment whose downtime cannot be tolerated, or equipment used as a life support item. Unless otherwise specified, Class 3 shall be used for soldering requirements on military electronic equipment.

      Printed circuit assemblies are manufactured in a variety of ways, exclusively using smt devices or smt mixed with through-hole components. Boards which have both SMC’s and through-hole components are called mixed technology boards. Surface

      mount components are conventionally attached to the substrate using the reflow or the wave soldering process. Typically PCBs are assembled in one of the following ways and categorized as:

      Type 1:

      SMC’s only are placed on one or both sides of a printed circuit board. The components are attached via the Reflow soldering process.

      Type 2:

      A combination of both surface mount and insertion mounted components on a printed circuit board. Both SMC’s and IMC’s are assembled on the top side of the board while SMC’s only are attached to the bottom of the board. Top side smt components are Reflow soldered, while the through hole and bottom side smt components are Wave soldered.

      Type 3:

      IMC’s are assembled on the top side of the board while SMC’s only are attached to the bottom of the board. The components are soldered in place via the Wave solder process.

      The fast growth of these applications and advanced packages has led to the development of high density boards. As the industry increases the use of these boards and packages in its products, two of the greatest challenges that it will face are; establishing effective printing guidelines and utilizing equipment that can reliably produce a wide variety of assemblies.

      A company’s success or failure in the surface mount industry will weigh heavily on its ability to adapt to automated manufacturing practices through innovative product design and development. Manufacturers can effectively compete in the electronics marketplace today only by utilizing automated equipment throughout the entire SMC assembly process. This includes addressing changes in the SMC production process from initial board printing to final inspection. The companies that do not act positively on these factors and successfully adapt to changing trends in the electronics market will find their business being lost to competitors and foreign ventures.

      Type 1 – Single Sided SMT
      SMT Components (Primary Side only)

      Print Solder Paste Place SMT Components

      Reflow Solder

      Clean(if required) In Circuit Test/Rework

      Surface Mount Process 1-13

      AI, Auto Insertion : Axial Inserter; Radial Inserter; JW (Jumper Wire) Inserter; Odd form Inserter; PIN inserter; Eyelet Inserter; Terminal Inserter IM, Insertion Mount,MI,Manual Insertion,DIP,  PCB Assembly,Chip Mounter, Pick and Place,  IC Mounter, High Speed Mounter, Wave soldering,LED lighting, LED Lamp, LED Display,  LED tube,UPS, Power Converter, Power Adepter, Mobile Charger, PCB board handling system,  Loader, Unloader, Conveyor,Shuttle,Chip Mounter, Pick and Place, IC Mounter, High Speed Mounter Induction Cooker, AC, Electric Cooker, Fan, TV, Settle Box

       

       

       

       

       

       

       

       

       

       

      Type 1 – Double Sided SMT
      SMT Components (Primary & Secondary Side)

      Print Solder Paste Place SMT Components

      Reflow Solder

      Clean(if required) Flip PCB

      Print Solder Paste Place SMT Components

      Reflow Solder

      Clean(if required) In Circuit Test/Rework

      Surface Mount Process 1-14

      AI, Auto Insertion : Axial Inserter; Radial Inserter; JW (Jumper Wire) Inserter; Odd form Inserter; PIN inserter; Eyelet Inserter; Terminal Inserter IM, Insertion Mount,MI,Manual Insertion,DIP,  PCB Assembly,Chip Mounter, Pick and Place,  IC Mounter, High Speed Mounter, Wave soldering,LED lighting, LED Lamp, LED Display,  LED tube,UPS, Power Converter, Power Adepter, Mobile Charger, PCB board handling system,  Loader, Unloader, Conveyor,Shuttle,Chip Mounter, Pick and Place, IC Mounter, High Speed Mounter Induction Cooker, AC, Electric Cooker, Fan, TV, Settle Box

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

      Type 2 – Mixed Technology
      SMT &Through-Hole Components (Primary Side) Passive SMT Components (Secondary Side )

      Surface Mount Process 1-15

      Squeegee Aperture Paste

      On Contact

      Frame

      Print Solder Paste Place SMT Components

      Reflow Solder

      Components

      Flip PCB

      Place SMT Components

      Cure Adhesive Flip PCB Wave Solder Clean (If Needed) Test / Repair

      Insert / Clinch Through-Hole

      PCB

      Apply Adhesive (secondary Side)

      AI, Auto Insertion : Axial Inserter; Radial Inserter; JW (Jumper Wire) Inserter; Odd form Inserter; PIN inserter; Eyelet Inserter; Terminal Inserter IM, Insertion Mount,MI,Manual Insertion,DIP,  PCB Assembly,Chip Mounter, Pick and Place,  IC Mounter, High Speed Mounter, Wave soldering,LED lighting, LED Lamp, LED Display,  LED tube,UPS, Power Converter, Power Adepter, Mobile Charger, PCB board handling system,  Loader, Unloader, Conveyor,Shuttle,Chip Mounter, Pick and Place, IC Mounter, High Speed Mounter Induction Cooker, AC, Electric Cooker, Fan, TV, Settle Box

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

       

      Type 3 – Mixed Technology Through-Hole Components (Primary Side) Passive Surface Mount Components (Secondary Side )

      Flip PCB

      Place Surface Mount Components

      Surface Mount Process 1-16

      Insert / Clinch Through-Hole Components (Primary Side)

      Apply Adhesive (Secondary Side)

      Cure Adhesive Flip PCB Wave Solder Clean (If Needed) Test / Repair

      AI, Auto Insertion : Axial Inserter; Radial Inserter; JW (Jumper Wire) Inserter; Odd form Inserter; PIN inserter; Eyelet Inserter; Terminal Inserter IM, Insertion Mount,MI,Manual Insertion,DIP,  PCB Assembly,Chip Mounter, Pick and Place,  IC Mounter, High Speed Mounter, Wave soldering,LED lighting, LED Lamp, LED Display,  LED tube,UPS, Power Converter, Power Adepter, Mobile Charger, PCB board handling system,  Loader, Unloader, Conveyor,Shuttle,Chip Mounter, Pick and Place, IC Mounter, High Speed Mounter Induction Cooker, AC, Electric Cooker, Fan, TV, Settle Box

      How to maintain Auto Insertion and SMT machine — ESD Cleaning and Testing Procedures

      Procedures and Adjustments

      CAUTION

      The following procedures explain how to properly clean and test an ESD surface.

      Clean an ESD Surface

      Do not use abrasive or highly alkaline cleaners on polycarbonate. Never scrape polycarbonate with squeegees, razor blades, or other sharp instruments. Benzene, gasoline, acetone, or carbon tetra chloride should never be used on polycarbonate. Do not clean polycarbonate in the hot sun or at elevated temperatures.

      1. Using a sponge or soft cloth, wash the ESD-protected surface with either a mild detergent or Windex product and lukewarm water.
      2. After washing, rinse with water and dry thoroughly with a chamois or moist cellulose sponge to prevent water spots.
      3. To protect the ESD surface after rinsing and drying,  recommends applying Kleenmaster Brillianize®. This application helps to maintain the static dissipative coating and reduce the accumulation of dust.

      Test Static Dissipative Covers

      Periodically and after maintenance, check the machine covers to determine if the dissipative qualities of the cover have changed. The following procedure ensures that static dissipative covers are in fact dissipative.

      Tooling

      Surface resistance meter (such as 3M 701 Surface Resistance meter and probe).

      Comments

      The surface resistance should be less than 109 ohms in all areas. If the cover package is no longer dissipative, contact you Universal Instruments Corporation sales representative.

      Procedure

      1. Clean the static dissipative covers using the Clean ESD Surface procedure to ensure the accuracy of the test.
      2. Using the surface resistance meter, follow the instructions provided by the manufacturer to measure the surface resistance of both the inside and outside of the covers. Measure the resistance at all four corners and at several areas in the middle of the cover. This test checks the integrity of the ESD coating.
      3. Connect the ground path resistance probe to the meter and chassis ground.

      The path to the ground should not be higher than the surface resistance. If it is, clean the frame connections, repair loose or corroded fasteners and ground straps, and check tracks for dirt and/or corrosion.

      4. Measure the ground path from the covers to the chassis ground. Take this measurement from both surfaces and all four corners of each cover.

      LED lighting, LED Lamp, LED Display, LED tube

      How to invest future – Auto Insertion and SMT equipment ROI calculation

      Fill in “Green Areas” on Summary Sheet Below & Production Need Sheet

      Calculations in “Blue” or “White” and should not be changed

      INPUTS
      Financial Machine Price Depreciation Time (Years)

      Electricity Cost ($/kWHr)

      US$ 205,000

      5

      US$ 0.1200
      Machine Data Configuration Pass Thru / Non Pass Thru

      Spec Speed

      Sm Triple Span (2.5/5.0/7.5) Pass Thru (Automatic BDH)

      22,000

      Labor Rates / Hour Machine Operator Maintenance
      US$ 10.00 US$ 15.00
      Factory Work Time

      Hours / Day

      Days / Week

      Weeks / Year

      20

      6

      50

      Hand Labor

      Hand Labor Rate

      Insertion Rate / Hour

      US$ 6.00

      250

      OUTPUTS
      Production Data
      Insertions Needed   4,900,000 Annual Component Insertion
      Machine Work Time
      Machine Time

      613

      Hours to MFG
      Hours in Year

      6000

      Machine Utilization

      10.22%

      Machine Yearly Costs
      Depreciation US$ 41,000 Straight Line Depreciation
      Utilities US$ 155 Electricity for Machine & Air
      Maintenance US$ 900 Parts & Labor for Machine
      Operator US$ 6,132 Operator Time @ machine
      Total Yearly Costs US$ 48,186 Sum of all costs
      Hand Labor Equivalents
      Labor Hours   19,600
      Labor Costs US$ 117,600
      MACHINE DRIVEN SAVINGS
      Hand Placement Cost US$ 117,600 Per Year
      Machine Placement Cost US$ 48,186 Per Year
      Annual Savings US$ 69,414 Per Year

       

      Price

      Unit

      Notes

      Machine Cost

      US$ 205,000

      $

      Machine Costs

      Depreciation Time

      5

      Years

      Straight Line Assumed

      Yearly Deprciation Expense

      US$ 41,000

      Result

      Work Days per Week

      6

      Days

      Hours Per Day

      20

      Hours

      Weeks per year

      50

      Weeks

      Hours per Year Available

      6,000

      Hrs/Year

      Work Hours per Year

      PM  Hours per 100 Hrs

      12

      Hours

      Maintenance

      Machine Working Hours

      522

      Hours

      Total Production Hours

      Maintenance Intervals

      5

      Periods

      Maintenance Times

      Maintenance Time

      60

      Hours

      Maintenance Times

      Maintenance Labor Cost

      US$ 900

      Costs

      Labor Hours x Rate

      Production Hours Needed

      522

      Hours

      Machine Production Time

      Intrinsic Availability

      94.00%

      Uptime

      Downtime (Increased based on Age)

      Lost Hours

      31

      Hours/Yr

      Downtime

      Machine Hours To Produce

      553

      Hours

      Production Hours

      Guide Jaw / Clinch Costs

      US$3,000

      Cost

      Per Unit

      Tooling Replacement

      6,000,000

      Cycles

      Cycles per replacement

      Tooling Replacements / Yr

      0

      Replacements

      Replacements Needed

      Yearly Replacement Costs

      US$0.00

      Costs

      Total Yearly Tooling Costs

      Chain Clip Replacments

      US$780

      Cost

      Cost Per Replacement

      Tooling Replacement

      15,000,000

      Cycles

      Cycles per replacement

      Tooling Replacements / Yr

      0

      Replacements

      Replacements in a Year

      Yearly Replacement Costs

      US$0.00

      Costs

      Total Yearly Chain Costs