SCM24 Auto Cleaning machine for Nozzle

ITEMSME-24 SPEC
Air supply0.5~0.7Mpa
Power supplyAC220V,1A
Clean liquidPurified water or DI water 
Clean time3~6min
Dry time1~3min
Spray pressure0.55Mpa
Clean liquid consumption150cc/Hour
Nozzle rangeMin01005~Max hole diameter2.0mm
Jig spec24holes
Machine sizeL665*W555*H475(mm)
Machine weight30KG

Description

Overview:

SCM-24 using the hydrodynamic water fragmentation,producing very fine water mist,with the speed of sound (V = 360m/s) to form a strong momentum jet to the nozzle, nozzle for cleaning at the top of the formation of a continuous field,crushing the internal surface of the dirt (the nozzle will not be damaged because of its independent device),during the cleaning process the used cleaning water (deionized water or distilled water) automatic direct emissions.

Functions:

1. Thoroughly clean the dirt on nozzles which ultrasonic cleaner can not clean.

2. Strong clean power for nozzles ,even the smallest nozzle hole.

3. Very good cleaning effectiveness, extend lifespan of the nozzles.

4. No damage to the coating layer of the nozzle and its reflector panel.

5. Only use DI water or distilled water .

6. Auto clean and dry.

7. Easy operation.

8. Right for all kind of mounter nozzles .

Multifunctional Humanized Functions:

1. With TP operation interface, PLC programme control;easy operation.

2. Pneumatic parts are Japan SMC ,this gurantee the stability and efficiency of the machine.

3. Main parts of the machine, like cleaning room; water tank; nozzle and jet head rotation mechanism and installation base are made of SUS304,special parts used SUS 316 from Japan,to ensure that the machine will not rust due to the water,to avoid other security risks and get longer life;

 

Cleaning Principle:

Withit special mechanical design,SCM-24 using the hydrodynamic water fragmentation,producing very fine water mist,with the speed of sound (V = 360m/s) to form a strong momentum jet to the nozzle, nozzle for cleaning at the top of the formation of a continuous field,crushing the internal surface of the dirt (the nozzle will not be damaged because of its independent device),during the cleaning process the used cleaning water (deionized water or distilled water) automatic direct emissions.

Specification

ITEMSME-24 SPEC
Air supply0.5~0.7Mpa
Power supplyAC220V,1A
Clean liquidPurified water or DI water 
Clean time3~6min
Dry time1~3min
Spray pressure0.55Mpa
Clean liquid consumption150cc/Hour
Nozzle rangeMin01005~Max hole diameter2.0mm
Jig spec24holes
Machine sizeL665*W555*H475(mm)
Machine weight30KG
SCM24 cleaning result compare with Ultrasonic cleaner

 

SCM24 cleaning result compare with Ultrasonic cleaner(2)

 

Other cleaning Machine

PCB-bare-board-cleaner-
PCB-bare-board-cleaner
PCB-bare-board-cleaner-
PCB-bare-board-cleaner
SMT cleaning machine
SMT cleaning machine