S-6000V SPECIFICATION

Catalog

1.Description 2.Specification 3.Feature 4.Operation panel 5.Operation Guide

  • Menu Function
  • Programming Process
    • Calibration
    • Place strip

 

  • Material Station Setting
  • Place PCB board
  • Import coordinate
  • Puzzle Set
  • Operation Procedure
    • Basic Procedure
    • Safety

 

  • Maintenance and management
    • Maintenance
    • Common Faults
  • Configuration
  • Quality Guarantee

 

 

 

 

 

 

 

 

 

 

 

 

  • Description

S-6000 is dedicated to research and develop electronic products, it is a small desktop type machine which suits for small and medium-sized enterprise assembly line is developed by our company. This machine has

 

superior function 1.small batch production. 2. Experiment, research and development. 3. Sample Preparation and trial-produce. 4. Processing and Mounting LED SMT, etc.

The main characteristic of S-6000 is small volume, Mounting very fast, high precision when it works, simple operation, stable running and competitive price. Not only can help you to avoid the mounting instability by man-made, but also can help you to solve the problem like high labor cost, high site cost, low production efficiency, and so on. Our product can greatly improve the productivity.

 

 

 

  • Specification

 

Desktop Automatic Budget SMT Machine
Model

S-6000A

S-6000V

Applicable PCB

18mm*18mm-305mm*368mm

Visual System

up visual system

up and down visual system

Visual function

Mark point positioning function

Placement Head Quantity

2

Feeders

no

20

Strip Roller Quantity

27

26

 

IC Tray

 

no

 

1 Shelves

Mounting Capability

3000PCS/h

3000PCS/h

Mounting Accuracy

±0.03mm

 

Applicable Components

 

0402~24mm, CHIP, SOP, QFP, SOT

Tape Width: 8mm,12mm,16mm,24mm

External Dimension

750*633*430

648*690*470

Weight

59KG( 85.5KG including the package)

63.5KG( 90KG including the package)

Vacuum Pump

-92KPA (Included, Mute Pump)

Vacuum Pump Quantity

2(Included, Mute Pump)

Power Supply

220V , 50Hz

Average Working Power

100W

 

 

  • Feature
    • On the basis of programming and control system of WindowsXP, it is supported to import the coordinate file and online programming
    • vision correction: Mounting vision correction, Machine tool vision correction
    • 2 Placement Heads can work in the same time and the mounting range is big. It supports big and thick component. 4 placement heads can be choosed
    • Laser alignment, online programming
    • Vacuum detection, intelligent discriminant good or bad adsorption
    • Detection of material lack, automatic alarm
    • Support multi-feeding ways: feeder belt, feeder, IC tray, IC material tray
    • Encapsulation apply

 

  • common resistance, capacitance, inductance    and diode

 

  • SOP series

 

  • QFN, TQFP, BGA

 

  • TO252    SMA SMB
 

 

 

 

 

SOP-8 (SO8) narrow

SSOP-20 wide

TSOP-44

 

 

 

SMA

SMB

OT252

5. SOT series 

 

 

 

0402, 0603

0805, 1206

1210, 1812

2010, 2512

3528, 5050

LL34

TQFP-144

 

 

 

SOT-223

SOT-23

SOT-89

 

 

 

  • Operation panel

    • Reset Button:    Reset the system data can be restored to the initial state
    • Lighting Button:    The light switch
    • Acceleration and deceleration: Adjust the machine speed
    • Step Distance Button:    Adjust the step distance, step distance: 0.025    0.2    1    5    25 100    mm) Standard step distance: 5
    • Left and right, Up and down Button:    Move the direction key
    • Start/stop:    decide when the machine work start and suspend
    • Emergency stop button: Machine is in wrong operation, click this button, the machine stops running and in the locked state. After solve the problems, this button will rotate rightwill be back to start, open unlock Safe , the machine will work properly
    • Alarm:    Color light alarm, Red is stop state, green is working state. When the machine at work when a fault occurs, the red lights and alarm

 

  • Operation Guide

    • Menu Function

Level 1 menu
nameLevel 2menu
nameMenu functions instructions
FileNew FileImport and build new coordinate filesOpen FileOpen the saved file SMT programmingEditCheck the dataCheck list configuration material stand material unit
configurationshortcut keyCut and paste, paste, copy, delete

SettingBackup and recovery machine
parametersMachine tool fault
solvingCheck system failureCalibrationBefore using equipment calibration machineSystem of
material stripBuilding material components encapsulation, information and
material feed configurationSystem of
componentEstablish station components packaging information

ControlUnlockUnlock the machineLockLock the machineHeatingHeating the machineOpen cursorOpen the machine cross cursorClose cursorClose the machine cross cursor
ViewToolbarCould show and hide the toolbarList to adapt to
the widthReduce and enlarge the programming listHelpAboutView the system version informationMachine
debugging toolsCan debug and test the function of each part of the machine

Programming Process

Machine Calibration -> Put Material Strip    –> Set Material Stationcheck material -> Put PCB    -> Import Coordinates -> Puzzle SetCheck PCB

  • Calibration

Enter the menu- Set -> Calibration, Align the cursor, nozzle, pull needles and other equipment in order one by one, details are in the corresponding instructional videos.

 

  • Put Material Strip

Put the material strip on the shelf, details are in the corresponding instructional videos.

  • Material Station Setting

Set the material stand center coordinates, broaching coordinates (for belt material stand), Set column spacing (for disc material stand), This process is referred to as “Material Station Setting”, details are in the corresponding instructional videos.

  • Place PCB board

Put empty PCB board with no solder paste on the machine, Carefully adjust the distance of the jig, To ensure that the PCB securely holding.

  • Import coordinate

Enter the main menu file – > new file, import a coordinate file. Support import the coordinate file and online programming coordinate file PCB software: PADS, CAM350, protel99, Altium Designer and so on, details are in the corresponding instructional videos.

  • Puzzle Set

Choose from two of the far patch points, To establish the corresponding relation of the origin and the origin of
the machine tool programming, This process is referred to as “Puzzle Set”, details are in the corresponding
instructional videos.

  • Operation Procedure

    • Basic Procedure

 

 

 

->

 

->

Solder Paste

S-6000V

Reflow

 

Solder Paste -> SMT pick and place machine -> Reflow Soldering

 

 

  • This machine has a certain dangerous, non-professional workers do not operate.
  • Before using,Please ensure that the machines work platform area no obstacle to run again, in the run process, do not put your hands in the working area and cover the protect shell.

 

  • Maintenance and management

    • Maintenance

      • Keep the machine clean,do not put anything on the machine, and also close the protection shell. Cover the protection shell and disconnect the power switch under no use the machine circumstance.
      • Stopped for a long time before using again, put lubricating oil in the X Y axis,keep the machine running smoothly.
      • Using the nozzle for the long time, please clean and make sure the machine is unblocked.
    • Common Faults

      • The needle do not work: Possible reasons:
  • Pull needle can not move down, check to pull needle power supply.
  • Needle couldn’t lift, check whether the needle stuck, the system will be an error. If stuck to artificial troubleshooting, to pull the needle back to normal.
    • The nozzle do not work:

      Possible reasons:

      • Check whether the suction nozzle is fixed in place.
      • Whether the suction nozzle deformation or blocked.

 

 

  • Configuration

 

 

  • Quality Guarantee

We are not in favor of users to repair itself.

The machine warranty is 1 years, When the machine has any problems in this period, we could repair and change. But in any case, our company’s responsibility can’t more than the purchase price of the product.

If the machine have any problems in the using process, according to the common failures suggest and the solution still cannot be solved, the user shall not open the case, please contact our company’s Marketing Department or agents.

For the faults caused by the manufacturing defects, our company is responsible for free repair or

replacement products.

This guarantee is only applicable to normal use of equipment, and the absence of damage or improper use. The warranty does not include the problem/fault caused by the following reasons:

  • Repair or change the machine without authorization.
  • The proper use of, inadvertent use or accidental, etc.

Please keep the warranty registration card and the Invoice, for the record when we need to maintenance, Technological innovation, Calibration, etc.