SME24 Auto Nozzle Cleaning machine

ITEM SME-24 SPEC
Air supply 0.5~0.7Mpa
Power supply AC220V,1A
Clean liquid Purified water or DI water 
Clean time 3~6min
Dry time 1~3min
Spray pressure 0.55Mpa
Clean liquid consumption 150cc/Hour
Nozzle range Min01005~Max hole diameter2.0mm
Jig spec 24holes
Machine size L665*W555*H475(mm)
Machine weight 30KG

Description

Overview:

SCM-24 using the hydrodynamic water fragmentation,producing very fine water mist,with the speed of sound (V = 360m/s) to form a strong momentum jet to the nozzle, nozzle for cleaning at the top of the formation of a continuous field,crushing the internal surface of the dirt (the nozzle will not be damaged because of its independent device),during the cleaning process the used cleaning water (deionized water or distilled water) automatic direct emissions.

Functions:

1. Thoroughly clean the dirt on nozzles which ultrasonic cleaner can not clean.

2. Strong clean power for nozzles ,even the smallest nozzle hole.

3. Very good cleaning effectiveness, extend lifespan of the nozzles.

4. No damage to the coating layer of the nozzle and its reflector panel.

5. Only use DI water or distilled water .

6. Auto clean and dry.

7. Easy operation.

8. Right for all kind of mounter nozzles .

Multifunctional Humanized Functions:

1. With TP operation interface, PLC programme control;easy operation.

2. Pneumatic parts are Japan SMC ,this gurantee the stability and efficiency of the machine.

3. Main parts of the machine, like cleaning room; water tank; nozzle and jet head rotation mechanism and installation base are made of SUS304,special parts used SUS 316 from Japan,to ensure that the machine will not rust due to the water,to avoid other security risks and get longer life;

 

Cleaning Principle:

Withit special mechanical design,SCM-24 using the hydrodynamic water fragmentation,producing very fine water mist,with the speed of sound (V = 360m/s) to form a strong momentum jet to the nozzle, nozzle for cleaning at the top of the formation of a continuous field,crushing the internal surface of the dirt (the nozzle will not be damaged because of its independent device),during the cleaning process the used cleaning water (deionized water or distilled water) automatic direct emissions.

Specification

ITEM SME-24 SPEC
Air supply 0.5~0.7Mpa
Power supply AC220V,1A
Clean liquid Purified water or DI water 
Clean time 3~6min
Dry time 1~3min
Spray pressure 0.55Mpa
Clean liquid consumption 150cc/Hour
Nozzle range Min01005~Max hole diameter2.0mm
Jig spec 24holes
Machine size L665*W555*H475(mm)
Machine weight 30KG
SCM24 cleaning result compare with Ultrasonic cleaner

 

SCM24 cleaning result compare with Ultrasonic cleaner(2)

 

Other cleaning Machine

PCB-bare-board-cleaner-
PCB-bare-board-cleaner
PCB-bare-board-cleaner-
PCB-bare-board-cleaner
SMT cleaning machine
SMT cleaning machine

 

 

[pdf-embedder url=”https://www.smthelp.com/wp-content/uploads/2019/06/SCM24-Auto-Nozzle-Cleaner2019.pdf” title=”SCM24 Auto Nozzle Cleaner2019″]