S-4000 Axial Insertion Machine

S-4000 Series Axial insertion machine is insert axial component which was sequence the components from tape on the chain conveyor as program  and JW to PCB, and clinch and cutter,  fixed axial component on PCB. 

Feature: Insert JW into PCB directly, no need make into tape again. It can save 1/3 JW. The insertion head is steady, the rotary table is movable, include vertical or horizontal direction, ensure precisely insert components in PCB.

SPEC:

1 Insertion rate 22000PCS / H
2 Insert direction Parallel 0°,90°,180°,270°
3 Components span Dual span: 5.0mm-20mm(Insert jumper wire can reach 5mm-20mm)
4 PCB Size (Min)50 mm x50mm、(Max)450mm x 450mm
5 Components available Capacitors, transistors, diodes, resistors, fuse and so on, must be Tape packed electronic components.
6 Jumper Wire (JW) Independent feed device, no need sequencing.. diameter 0.5mm-0.7mm copper wire plated with tin.
7 Clinch Length 1.2-2.2MM (adjustable)
8 Clinch degree 10-35°(adjustable)
9 Machine Size (L × W ×H) 1830mm×1200mm×1720mm
10 Machine Weight 1500KG
11 Power supply 220V, AC (single phase) 50/60 HZ, 1.5KVA;
12 System Protection UPS, keep machine run 15 minutes without power
13 Working Power 800W (Energy-saving)
14 Air pressure  0.5 Mpa
15 Air consumption 0.1 m3/minute
16 Coordinate correction Machine vision systems, multi-point MARK vision correction.
17 Driving system AC Servo、 AC motors
18 Data input USB interface input (EXCEL format)
19 Control System English version interface (WINDOWS system control platform)LCD monitor
20 Rotary table Clockwise or anticlockwise
21 PCB transfer mode Manual /Automatic optional

 

Electrical industries appliances:Air conditioner, Television, Microwave, Electric cooker, Electric kettle, Induction cooker etc.

Vehicle industries application: Vehicle power supply, Vehicle light, Car audio etc.

Power supply appliance: Vehicle power supply, Energy saving power supply, Ballast etc.

Write a Comment

Your email address will not be published. Required fields are marked *