$4000.00 Upgrade Universal Radial Insertion machine to Quad Span electronics component PCB assembly

Large Triple Span Machines (5.0/7.5/10.0 mm Span) Insertion performance is maximized by considering the jaw tooling design when laying out the PC board hole patterns (the jaw clamps secure the component leads against the fixed surfaces of the jaw guide). For best results, the insertion hole spans in the PC board should be designed as follows: • For 5.0 mm Spans: – Round leads: One lead diameter + 4.50 mm (0.177 in.) = Recommended Lead Hole Span – Rectangular leads: One lead width + 4.50 mm (0.177 in.) = Recommended Lead Hole Span • For 7.5 mm Spans: – Round leads: One lead diameter + 7.04 mm (0.277 in.) = Recommended Lead Hole Span – Rectangular leads: One lead width + 7.04 mm (0.277 in.) = Recommended Lead Hole Span • For 10.0 mm Spans: – Round loudens lead diameter + 9.58 mm (0.377 in.) = Recommended Lead Hole Span – Rectangular leads: One lead width + 9.58 mm (0.377 in.) = Recommended Lead Hole Span

Write a Comment

Your email address will not be published. Required fields are marked *