所有由sy发布的文章

PCB Surface Cleaning Machine

Able to clean top surface of PCB even chip components attached on the bottom side.
Antistatic bar (ionizer) is prepared as standard to neutralize static and to prevent dust from top surface of PCB.
Two Lanauge Display Chinese And English,easy Opertion.
Draw-out Design For Better Maintenance.
Professional Design And Production Clean Machine With Many Years Experience , We Know What Customer Requirement .

contact us:shaoyong@smthelp.com     WhatsApp:+86 137 6048 1664

Model Dimension (L*W*H.MM) Effection PCB size Weight(KG)
S-K250 550*650*1350 50*50–250*330 170KG
S-K330 550*680*1200 50*50–330*450 185KG
S-K390 550*780*1200 50*50–390*530 220KG
S-K460 550*850*1200 50*50–460*530 260KG

Telescopic Gate Conveyor

The Telescopic Gate Conveyor from Electro Design is a fully automated pass through conveyor that allows people and vehicles to go through, rather than round a complete line. Since the retracted position of the telescopic conveyor is its idle position there is no need to press any buttons to pass through the line. Each side and section of the conveyor has its own motor drives and belts.
Working height (mm) 900±20(std)
Transport Speed 1-15meters per minute or as your specified
Power supply 100V, 220v,230V (single-phase AC)
Power Maximum 100 W
Belt type 4mm flat belt
Telescopic Length(mm) 850mm
Stretch out / retract 6 sec

contact us:shaoyong@smthelp.com    WhatsApp  :+86 137 6048 1664

Model Dimension (L*W*H.MM) Effection PCB size Weight(KG)
SAC330 1500*850*1300 50*50-445*330 250KG

Pcb Traverser

The Pcb Traverser Is Used For Transporting Boards From One Line Into Two Lines Or Vice Versa.
The Orientation Of The Board Is Not Changed During Traversing.

contact us:shaoyong@smthelp.com      WhatsApp:+86 137 6048 1664

Model Dimension (L*W*H.MM) Effection PCB size Weight(KG)
SPD330 500 * 750 * 1050 50*50-330*250 140KG
SPD460 600 * 880 * 1050 50 * 50-457 * 390 220KG

90° Degree Turning Conveyor

The 90° PCB Turn Conveyor is used for changing the direction of flow of a PCB assembly line.
The PCB is transferred onto the built-in belt conveyor which turns either 90° clockwise or counter clockwise.

contact us:shaoyong@smthelp.com    WhatsApp:+86 137 6048 1664

Plc Control
Diameter: 3mm Edge Round Belt
Air Pressure: 5kgf/cm2
Power: Ac220v, 50/60 Hz, 1 Phase
Pcb Convey Directon: L-r ( Or R-l)
Front Rail Fxed ( Or Rear Rail Fxed)
Conveyor Height:900+/-50mm
Conveyor Speed: 10m/s

Model Dimension (L*W*H.MM) Effection PCB size Weight(KG)
SCN250 500*563*1200 50*50-330*250 150KG
SCN330 580*643*1200 50*50-400*330 170KG

Lowering Gate Conveyor

contact us:shaoyong@smthelp.com    WhatsApp:+86 137 6048 1664

The Manual Lift Gate Conveyor is used when a passage way is required in a production line.
By manual lifting the conveyor section, access is gained to the rear of the line. (semiautomatic).
PLC Control system.
Cylinder assisted lifting motion
Width adjustment by hand crank.
Pneumatic locking device installed to enhance safety.
SMEMA compliant.
CE certified

Model Dimension (L*W*H.MM) Effection PCB size Weight(KG)
SLC400W-N 1300*570*1050 50*50-445*400 180KG

Pcb Ng/ok Unloader

contact us:shaoyong@smthelp.com     WhatsApp:+86 137 6048 1664 

The PCB NG/OK Unloader is used for good/bad PCB separation. The OK and NG PCB
after being tested by test machine can be separated and sent to magazines
Omron PLC Control system.
Touch screen easily operation.
Good and bad PCB’s can be separated automatically with magazine rack.
Multiple pitches selectable.
Direction from left to right, or right to left (optional).
SMEMA compliant.
RoHs .CE certified

Model Dimension (L*W*H.MM) Effection PCB size Weight(KG) Rack size(L*W*H.MM)
SNL250 1510*1530*1250 50*50-330*250 310KG 355*320*563
SNL330 1910*1630*1250 50*50-445*330 340KG 460*400*563
SNL390 2160*1760*1250 50*50-530*390 370KG 535*460*563
SNL460 2160*1900*1250 50×50-530×460  400KG 535*530*563

PCB Destacker

contact us:shaoyong@smthelp.com    WhatsApp:+86 137 6048 1664

User friendly touch screen control panel;
Uninterrupted loading;
Smooth and parallel with adjustments
Small machine footprint;
Automatically senses stack height
Pass-through function
SMEMA compatible
PCB Size – 50 mm L x 50 mm W to 400 mm L x 350 mm W ( Optional: 460mm width)
PCB Stack Capacity – 400 pcs. (0.6 mm thickness) or 240 mm (9.45″)
stack height PCB Thickness – 0.4 mm min. (0.016″ min.)2.5 mm max. (0.098″ max.)
Conveyor Direction – Left to right (standard) or right to left (optional) operation
Conveyor – 3 mm Edge Belt
Air Supply Pressure – 5-6 Kg/cm2 (70-85 psi)
Air Consumption – 30 l/min (1 CFM)
Voltage – 220 VAC, 50/60 Hz Power 150 VA max.
Machine Dimensions – 728 mm L x 700 mm W x 1127 mm H
Net Weight – 160kg
Shipping Weight – 200 Kg

Pcb Magazine Unloader

contact us:shaoyogn@smthelp.com    WhatsApp:+86 137 6048 1664

This equipment is used SMT circuit board production line operating upper and lower plates.
Magazine quantity: upper 1pc, bottom 1pc.
Tank Replacement time: about 30 seconds or a user specified
step select: 10,20,30,40 mm or user
spec. 110V or 220V, single phase max 250VA.
Barometic pressure from 4-6 bar, up to 10/min
Flexible platform to suit standard magazines. Regulated pressure on attached pneumatic pusher. Pusher position adjustable to centre of the magazine. User friendly “soft touch” LED membrane controlpanel.

Model Dimension (L*W*H.MM) Effection PCB size Weight(KG) Rack size(L*W*H.MM)
SUL250 1730*765*1250 50*50-330*250 160KG 355*320*563
SUL330 2065*845*1250 50*50-445*330 220KG 460*400*563
SUL390 2660*909*1250 50*50-530*390 280KG 535*460*563
SUL460 2660*970*1250 50×50-530×460  320KG 535*530*563

PCB Magazine Loader

contact us:shaoyong@smthelp.com    WhatsApp:+86 137 6048 1664

This equipment is used SMT circuit board production line operating upper and lower plates.
Magazine quantity: upper 1pc, bottom 1pc.
Tank Replacement time: about 30 seconds or a user specified
step select: 10,20,30,40 mm or user
spec. 110V or 220V, single phase max 250VA.
Barometic pressure from 4-6 bar, up to 10/min
Flexible platform to suit standard magazines. Regulated pressure on attached pneumatic pusher. Pusher position adjustable to centre of the magazine. User friendly “soft touch” LED membrane controlpanel.

Model Dimension (L*W*H.MM) Effection PCB size Weight(KG) Rack size(L*W*H.MM)
SLD250 1330*765*1250 50*50-330*250 140KG 355*320*563
SLD330 1650*845*1250 50*50-445*330 200KG 460*400*563
SLD390 1800*909*1250 50*50-530*390 240KG 535*460*563
SLD460 1800*970*1250 50×50-530×460  300KG 535*530*563

SMT conveyor

contact us:shaoyong@smthelp.com    WhatsApp:+86 137 6048 1664

How length conveyor do you need?
What is the maximum width of you PCB?
Do you need inspection with lighting
Do you need dual rail?
Do you need cover with cooling fan?
Do you need buffer bad boards?
Do you need working table both side?
We are able to customize conveyors

Item Model Length(mm) Max PCB Width(mm) Remark
1 S-350C 500 350 No Lighting
2 S-460C 500 460 No Lighting
3 S-350C-L 500 350 With Lighting
4 S-460C-L 500 460 With Lighting
5 S-350D 1000 350 No Lighting
6 S-460D 1000 460 No Lighting
7 S-350D-L 1000 350 With Lighting
8 S-460D-L 1000 460 With Lighting
9 S-350E 1500 350 No Lighting
10 S-460E 1500 460 No Lighting
11 S-350E-L 1500 350 With Lighting
12 S-460E-L 1500 460 With Lighting

Magezine Type Buffer

PCB Magazine Type Buffer Technical Parameters
• Description: This Device Used For Receiving NG Board Or Memory Board
• No.Of Magazine: Upper Conveyor: 1 Magazine; Lower Conveyor:2 Magazine
• Indexing Pitch: 10.20.30.40mm Or Specify
• Power Source: AC 110 Volts Or 220 Volts; Single Phase
• Power Consumption: Max 250VA
• Air Pressure & Air Consumption: 4-6bar, 15ltr/Min
• Transport Height: 900±20MM
• Transport Direction: From Left To Right Or Right To Left

Model Dimension (L*W*H.MM) Effection PCB size Weight(KG) Rack size(L*W*H.MM)
SBM250 1150*1150*1205 50*50-330*250 160KG 355*320*563
SBM330 1350*1350*1205 50*50-445*330 220KG 460*400*563
SBM390 1550*1550*1205 50*50-530*390 280KG 535*460*563
SBM460 1750x1750x1205  50×50-530×460  340KG 535*530*563

shaoyong@smthelp.com  WhatsApp:+86 137 6048 1664