Pneumatic stencil cleaner replaces manual cleaning step by step

SMT PCBA,Stencil cleaner

S-1688 Pneumatic Stencil Cleaner

Truly Automatic

For cleaning various stencils and misprinted PCBs, the combination of features offered by our S-1688 make it a unique, truly automatic cleaner. The threshold for usefulness of automation is allowing the operator to walk away from the process without worry. Stencil cleaners that require manual positioning and movement of stencils require attention from experienced operators to ensure consistent cleaning.

pneumatic stencil cleaner smthelp.com

S-1688 Pneumatic Stencil Cleaner

Economic and Environmental

No-rinse, aqueous cleaning agents for 100% closed loop process, for conformity to present and future economic and environmental operating requirements.The operator can start the cycle and walk away from the cleaning operation. Also, its compact footprint, integrated castors, and trivial connection requirements-its only connection is to a 240 volt outlet, with no water or drainage requirements-make it very flexible.

Pnumatic stencil cleaner

S-1688 Pneumatic Stencil Cleaner

Frees the Operator

S-1688 frees the operator by combining a specifically shaped ultrasonic cleaning chamber, continuous filtering of the cleaning bath, automatic indication of liquid level and filter status, and an automatic loading/unloading of the stencil. Its integrated loading arm ensures that every stencil is position precisely the same way in the cleaning tank, and that it is withdrawn from the cleaning chemistry as soon as the cycle is finished. Its filtration system continuously removes soils from the cleaning liquid, often maintaining the cleaning effectiveness of the medium for a year or longer (depending on usage, of course)

S-1688 stencil cleaner

S-1688 Pneumatic Stencil Cleaner

Efficient, Fast, Safe

Pneumatic design of stencil cleaning machine adopts full pneumatic control wash, to clean the stencil type circuit board, can effectively remove the solder paste and flux residue driven by the pneumatic logic control and efficient, fast, safe is cleaning the stencil current and recommended method, using rotating efficient atomization spray arms, four heavy solution filtration cycle use, simple maintenance, all stainless steel body, guarantee the life span.Adjust the appropriate screen hanging rack, move to clean items to center position, can be carried out on the screen or circuit board cleaning.

S-1688 Pneumatic stencil cleaner

  • Complete pneumatic operation without any fire risk
  • Equipment is ergonomically in designed
  • Cleaning and drying process is a simple one-button operation
  • Patented nozzle precision design ensure high cleaning process
  • Interior special design for better effect on rinsing and drying
  • Stencil tension is not affected during the cleaning process
  • Auto liquid feeding and draining system
    our levels filtering system with precise exhaust design and control
  • Liquid can be recycled which results in lower solvent consumption
  • Internationally recognized critical components are used to ensure
    long-term quality and reliability
  • Modular design to ensure easy maintenance
  • Solder paste and glue will adhere to the stencil hole during printing process
  • Manual cleaning is not effective in removing the solder paste deposit. Solidified and hardened deposits can cause the stencil mesh to deform
  • The printing quality will be adversely affected if the stencil is used
    without proper cleaning
Click Here to Email Us

 

Pnumatic stencil cleaner packing
Pneumatic stencil cleaner
Pnumatic stencil cleaner
Pneumatic stencil cleaner
Pnumatic stencil cleaner
Pneumatic stencil cleaner
Pnumatic stencil cleaner
Pneumatic stencil cleaner
Pnumatic stencil cleaner
Pneumatic stencil cleaner

Save

Save

Save

Save

Leave a Reply

Your email address will not be published. Required fields are marked *